| Model 66/32 | ||
|---|---|---|
![]() *Indicates part located on opposite side |
||
| item | Part Number | Description |
| 1 | G2210R (Bronze Reman) | Lever, Upper |
| G2210R-D (Maintenance Free Reman) |
||
| 2 | G2215 (Bronze New) | Lever, Lower |
| G2215R (Bronze Reman) | ||
| G2215-D (Maintenance Free New) |
||
| G2215R-D (Maintenance Free Reman) |
3 | A3000 (Bronze New) | Assembly, Cylinder - 14 1/2" |
| A3000CR (Bronze Reman) | ||
| A3000RG (Maintenance Free Reman) |
||
| 4 | 2030 | Pin, Fulcrum (Bronze Bushing Applications) |
| 2030-003 | Pin, Fulcrum (Maintenance-Free Applications) |
|
| 5 | 4250 | Beam, Brake, Left Hand |
| 4260 | Beam, Brake, Right Hand | |
| 4270 | Beam, Brake, Intermediate | |
| 6 | See Table 2 | Shoe, Brake |
| 7 | See Table 3 | Hardware, Brake Shoe |
| 8 | A2060 | Assembly, Lower Lever Spring |
| 9 | 2040 | Pin, Upper |
| 10 | 2042 | Retainer, Upper & Lower Lever Pin |
| 11 | 1644 | Bolt, 3/4” – 10 x 1 3/4” Hex Head |
| 12 | LW-ED-P-750-0 | Lock Washer, 3/4” Extra Duty |
| 13 | 2041 | Pin, Lower (Bronze Bushing Applications) |
| 2041-001 | Pin, Lower (Maintenance-Free Applications) |
|
| 14 | 1091 | Bolt, 1 1/8” – 7 x 3 1/2” Hex Head |
| 15 | LW-ED-N-11250-0 | Lock Washer,1 1/8” Extra Duty |
| 16 | 2031 | Retainer, Right Hand Fulcrum Pin |
| 17 | 2033 | Retainer, Left Hand Fulcrum Pin |
| 18 | 1320 | Pin, Cotter 1/4” x 3” Long |
| 19 | 2251C | Block, Thrust |
| 2250 | Bolt, Thrust Block | |
| 2253 | Shim, 1/8" Thrust Block | |
| 2254 | Shim, 3/8" Thrust Block | |
| FW-AN-P-1250-0 | Washer, Flat | |
| LW-ED-P-1250-0 | Washer, Extra Duty Block | |
| G2251C | Kit, Thrust Block (Includes Bolts, Shims and Washers) | |
| 20 | 6211C | Packing, 14 1/2" Cylinder |
| 1020 | Bolt, 1/2" x 1 1/2" Hex | |
| 1215 | Washer, with O-Ring Seal | |
| 1450 | Wire, #18 Soft Black | |
| G6211C | Kit, Cylinder Rebuild (Includes Packing, Bolts, Washers & Wire) |
|
| NOTE: The levers listed above include spring assemblies (upper or lower) and either adjusting screws or thrust bloks with shims and OEM hardware. The cylinders listed aboveare cast. If fabricated cylinders, or an exchange program is required, see your AAA Sales & Engineering sales representative. |
||
| Table 2: Brake Shoes | ||||
|---|---|---|---|---|
| Part Number | Style | Description (Length) | Bolt Type | |
| 4011 | Steel | Long Intermediate (74 5/8”) | Offset Head | |
| 4311A | Steel | Long Intermediate (74 5/8") | Square Head | |
| 4012 | Steel | Short Intermediate (37 1/4”) | Offset Head | |
| 4312 | Steel | Short Intermediate (37 1/4") | Square Head | |
| 4013 | Steel | Right Hand Entering(33 3/8”) | Offset Head | |
| 4313 | Steel | Right Hand Entering (33 3/8") | Square Head | |
| 4014 | Steel | Left Hand Entering (40 3/8”) | Offset Head | |
| 4314 | Steel | Left Hand Entering (40 3/8") | Square Head | |
| 4017 | Ductile Iron* | Noise Reducing Long Intermediate (45”) | Offset Head | |
| 4317 | Ductile Iron* | Noise Reducing Long Intermediate (45") | Square Head | |
| 4019 | Ductile Iron* | Noise Reducing Short Intermediate (29 1/2”) | Offset Head | |
| 4319 | Ductile Iron* | Noise Reducing Short Intermediate (29 1/2") | Square Head | |
| 4020 | Ductile Iron* | Noise Reducing Short Entering Left Hand (18 1/4”) |
Offset Head | |
| 4320 | Ductile Iron* | Noise Reducing Short Entering Left Hand (18 1/4") |
Square Head | |
| 4021 | Ductile Iron* | Noise Reducing Short Entering Right Hand (26 3/4") |
Offset Head | |
| 4321 | Ductile Iron* | Noise Reducing Short Entering Right Hand (26 3/4”) |
Square Head | |
| *Ductile Iron shoes require the use of steel tapered entering shoes. | ||||
| Table 3: Brake Shoe Hardware | ||
|---|---|---|
| Part Number | Style | Description |
| 1086 | Bolt | 7/8" – 9 x 4" Square Head, Non-Plated |
| 6317 | Bolt | 7/8" – 9 x 3 3/4, Non-Plated |
| 6322 | Bolt | 7/8” – 9 x 3 3/4”, Plated |
| 6323 | Bolt | 7/8” – 9 x 4”, Plated |
| 6324 | Bolt | 7/8” – 9 x 3 1/4”, Non-Plated |
| 6325 | Bolt | 7/8” – 9 x 4”, Non-Plated |
| 6326 | Bolt | 7/8” – 9 x 4-1/4”, Non-Plated |
| 1140 | Nut | 7/8” – 9 Heavy Hex |
| 1140-S | Nut | 7/8” – 9 Security |
| 1141 | Nut | 7/8” – 9 Prevailing Torque |
| FW-N-P-875-1 | Washer | Flat, Narrow, Hardened |
| LW-ED-P-875-0 | Washer | Split Lock, Extra Duty |
| 7008 | Washer | 7/8" Nord Lock |
| G6317 | Set | Bolt (6317), Nut (1140), Washer (LW-ED-P-875-0) |
| G6317S | Set | Bolt (6317), Security Nut (1140-S), Washer (LW-ED-P-875-0) |
| G6323 | Set | Bolt (6323), Security Nut (1140-S), Washer (FW-N-P875-1) |
| G6325 | Set | Bolt (6325), Nut (1140), Washer (LW-ED-P-875-0) |
| G6325F | Set | Bolt (6325), Nut (1140), Washer (FW-N-P-875-1) |
| G6325S | Set | Bolt (6325), Security Nut (1140-S), Washer (LW-ED-P-875-0) |
| G6325SF | Set | Bolt (6325), Security Nut (1140-S), Washer (FW-N-P-875-1) |
| G1086 | Set | Bolt (1086), Nut (1140), Washer (LW-ED-P-875-0) |
| G1086F | Set | Bolt (1086), Nut (1140), Washer (FW-N-P-875-1) |
| G1086NL | Set | Bolt (1086), Nut (1140), Washer (7008) |
| G1086S | Set | Bolt (1086), Security Nut (1140-S) Washer (LW-ED-P-875-1) |
| G1086SF | Set | Bolt (1086), Security Nut (1140-S), Washer (FW-N-P-875-1) |
| G1086SNL | Set | Bolt (1086), Security Nut (1140-S), Washer (7008) |
| G1080 | Set | Bolt (1080), Nut (1140), Washer (LW-ED-P-875-1) |
| G1080S | Set | Bolt (1080), Security Nut (1140-S), Washer (LW-ED-P-875-1) |